Skip to main content

Audi R8 - 2008

96.3 faults per 100 tests
Year average for all cars of 2008 is 340.8 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Audi R8, model year 2008. Sample size: 705 cars, 1,638 tests and 1,578 recorded faults.
0%
Less faults compared to the average car of same model year

Quick summary

Total: 705 cars

The 2008 Audi R8 has a significantly lower overall defect rate compared to the average car of the same year, with 96 defects per 100 vehicles, which is 71% better than average. This model particularly excels in categories such as brakes, steering, and body structure, where it performs considerably better than the average, showing defects at just 2% of the average rates in some categories. However, as mileage increases, defect rates rise, especially in the 62,000–93,000 mile range, where the R8 shows a higher number of defects than average. Overall, while tyre wear is present, the R8’s standout performance in critical safety-related areas sets it apart from its peers.

Cars by mileage segment

Total: 705 cars

Categories

Brakes
▲ 49.5% better
67.2 faults / 100 tests
Year avg: 133.1 / 100 tests
  • Brake disc or drum: insecure, fractured or otherwise likely to fail
  • Brake lining or pad: worn below 1.5mm
  • Brake disc or drum: significantly and obviously worn
  • Brake pipe damaged or excessively corroded
  • Brake hose ferrules: excessively corroded
Steering
▲ 87.8% better
2.2 faults / 100 tests
Year avg: 18.0 / 100 tests
  • Steering rack gaiter or ball joint dust cover: damaged or deteriorated
  • Power steering pipe, hose or wiring: excessively damaged or corroded
  • Power steering fluid leaking or system malfunctioning
  • A steering ball joint: with excessive wear or free play
  • Power steering fluid leaking or system malfunctioning
Visibility
▲ 71.9% better
7.1 faults / 100 tests
Year avg: 25.3 / 100 tests
  • Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
  • Windscreen washers not working or not providing sufficient fluid to clear the windscreen
  • Wiper blade: missing or obviously not clearing the windscreen
  • Wiper blade: defective
  • Windscreen washers not working or not providing sufficient fluid to clear the windscreen
Lights & Electrics
▲ 82.1% better
16.5 faults / 100 tests
Year avg: 92.2 / 100 tests
  • An obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning
  • A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
  • Headlamp levelling device inoperative
  • The aim of a headlamp is not within limits laid down in the requirements
  • The aim of a headlamp is not within limits laid down in the requirements
Wheels & Suspension
▲ 72.2% better
86.3 faults / 100 tests
Year avg: 310.3 / 100 tests
  • A shock absorber damaged … or showing signs of severe leakage
  • Tyre tread depth not in accordance with the requirements
  • A shock absorber damaged … or showing signs of severe leakage
  • A tyre: with a lump, bulge or tear … or with cords exposed or damaged
  • A suspension pin, bush, joint or bearing: excessively worn
Body/Structure
▲ 96.9% better
1.6 faults / 100 tests
Year avg: 51.3 / 100 tests
  • A transmission: joint, belt or chain excessively worn
  • Exhaust system has a major leak or is insecure
  • A body panel or body component: damaged or corroded and likely to cause injury when grazed or contacted, or insecure
  • A transmission shaft constant velocity joint boot: severely deteriorated
Equipment
▲ 98.0% better
0.2 faults / 100 tests
Year avg: 10.1 / 100 tests
  • An SRS malfunction indicator lamp (MIL) indicates a system malfunction
  • ESC MIL indicates a system malfunction
Other
▲ 71.8% better
11.6 faults / 100 tests
Year avg: 41.2 / 100 tests
  • Lambda coefficient outside the default limits or the range specified by the manufacturer
  • Engine MIL inoperative or indicating a malfunction
  • Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
  • Emissions test unable to be completed
  • Exhaust noise levels in excess of those permitted

Fault rate by mileage segment

Model    Year average
0 481 0–31,000 mi 31,000–62,000 62,000–93,000 93,000–124,000 124,000+
* Metric: faults per 100 tests.

Most common faults (Top 10)

Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 277
A shock absorber damaged … or showing signs of severe leakage
ADVISORY
Occurrences: 195
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 169
Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 146
Brake pipe damaged or excessively corroded
ADVISORY
Occurrences: 111
Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
ADVISORY
Occurrences: 72
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 65
An obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning
FAIL
Occurrences: 40
A shock absorber damaged … or showing signs of severe leakage
FAIL
Occurrences: 34
Brake lining or pad: worn below 1.5mm
ADVISORY
Occurrences: 34

Serious faults (Top 10)

An obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning
FAIL
Occurrences: 40
A shock absorber damaged … or showing signs of severe leakage
FAIL
Occurrences: 34
The aim of a headlamp is not within limits laid down in the requirements
FAIL
Occurrences: 12
Windscreen washers not working or not providing sufficient fluid to clear the windscreen
FAIL
Occurrences: 12
Lambda coefficient outside the default limits or the range specified by the manufacturer
FAIL
Occurrences: 11
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
FAIL
Occurrences: 11
Tyre tread depth not in accordance with the requirements
FAIL
Occurrences: 10
Brake disc or drum: insecure, fractured or otherwise likely to fail
FAIL
Occurrences: 9
Parking brake efficiency: below minimum requirement
FAIL
Occurrences: 8
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 7