Audi A6 - 2000
377.9 faults per 100 tests
Year average for all cars of 2000 is 366.2 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Audi A6, model year 2000.
Sample size: 229 cars, 461 tests and 1,742 recorded faults.
0%
More faults compared to the average car of same model year
More faults compared to the average car of same model year
Quick summary
Total: 229 cars
The 2000 Audi A6 has an overall defect rate of 378 defects per 100 vehicles, which is 4.4% higher than the average for cars of the same year. A notable trend is that as mileage increases, the defect rate rises significantly, particularly in the highest mileage bracket where it reaches 527 defects per 100 vehicles. The Audi A6 performs better than average in steering and equipment issues, with 24% and 67% fewer defects respectively. However, it stands out negatively in the "Other" category, showing a significantly higher defect rate of 81%, compared to the average of 57%.
Cars by mileage segment
Total: 229 cars
Categories
Brakes
▲ 10.0% better
146.6 faults / 100 tests
Year avg: 162.9 / 100 tests
- Brake pipe damaged or excessively corroded
- Significant brake effort recorded with no brake applied indicating a binding brake
- Flexible brake hose: excessively damaged, deteriorated, chafed, twisted or stretched
- Brake disc or drum: insecure, fractured or otherwise likely to fail
- Brake hose ferrules: excessively corroded
Steering
▲ 25.4% better
20.0 faults / 100 tests
Year avg: 26.8 / 100 tests
- A steering ball joint: with excessive wear or free play
- A steering ball joint: worn to the extent there is a serious risk of detachment
- A steering ball joint: with excessive wear or free play
- Steering rack gaiter or ball joint dust cover: missing or no longer prevents the ingress of dirt etc.
- Steering rack gaiter or ball joint dust cover: damaged or deteriorated
Visibility
▼ 2.1% worse
29.1 faults / 100 tests
Year avg: 28.5 / 100 tests
- Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
- Wiper blade: missing or obviously not clearing the windscreen
- Windscreen washers not working or not providing sufficient fluid to clear the windscreen
- Wiper blade: defective
- Wiper blade: missing or obviously not clearing the windscreen
Lights & Electrics
▼ 11.3% worse
88.9 faults / 100 tests
Year avg: 79.9 / 100 tests
- Product on the lens or light source which obviously reduces light intensity or changes emitted colour to other than white or yellow
- Lamp emitted colour, position or intensity not in accordance with the requirements
- A rear registration plate lamp or light source missing or inoperative: when rear registration plate has 2 or more lamps or light sources
- Headlamp reflector or lens: slightly defective
- An obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning
Wheels & Suspension
▼ 10.7% worse
312.4 faults / 100 tests
Year avg: 282.2 / 100 tests
- A suspension pin, bush, joint or bearing: excessively worn
- A spring: or spring component fractured or seriously weakened
- A tyre: with a lump, bulge or tear … or with cords exposed or damaged
- Tyre tread depth not in accordance with the requirements
- A suspension component: excessively damaged or corroded
Body/Structure
▲ 5.4% better
72.0 faults / 100 tests
Year avg: 76.1 / 100 tests
- Exhaust system has a major leak or is insecure
- A transmission shaft constant velocity joint boot: missing, split, insecure or no longer prevents the ingress of dirt
- A door will not open using the relevant control or close properly
- A transmission shaft constant velocity joint boot: severely deteriorated
- Exhaust system has a major leak or is insecure
Equipment
▲ 68.4% better
5.6 faults / 100 tests
Year avg: 17.7 / 100 tests
- An airbag obviously inoperative
- Seat belt not functioning as intended or of an incorrect type
- An SRS malfunction indicator lamp (MIL) indicates a system malfunction
- Audible warning:
- An SRS malfunction indicator lamp (MIL) indicates a system malfunction
Other
▼ 39.8% worse
81.1 faults / 100 tests
Year avg: 58.0 / 100 tests
- Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
- Emissions levels exceed default limits
- Exhaust emits excessive smoke or vapour of any colour to an extent likely to obscure the vision of other road users
- Lambda coefficient outside the default limits or the range specified by the manufacturer
- Emissions levels exceed the manufacturer’s specified limits
Fault rate by mileage segment
Model
Year average
* Metric: faults per 100 tests.
Most common faults (Top 10)
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 195
Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
ADVISORY
Occurrences: 131
Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 121
A spring: or spring component fractured or seriously weakened
ADVISORY
Occurrences: 99
A suspension component: excessively damaged or corroded
ADVISORY
Occurrences: 83
Brake pipe damaged or excessively corroded
ADVISORY
Occurrences: 82
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 81
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 74
Exhaust system has a major leak or is insecure
ADVISORY
Occurrences: 55
A transmission shaft constant velocity joint boot: severely deteriorated
MINOR
Occurrences: 53
Serious faults (Top 10)
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 48
A transmission shaft constant velocity joint boot: missing, split, insecure or no longer prevents the ingress of dirt
FAIL
Occurrences: 19
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
FAIL
Occurrences: 18
A steering ball joint: with excessive wear or free play
FAIL
Occurrences: 14
An obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning
FAIL
Occurrences: 14
Lambda coefficient outside the default limits or the range specified by the manufacturer
FAIL
Occurrences: 13
Emissions levels exceed default limits
FAIL
Occurrences: 12
Emissions levels exceed the manufacturer’s specified limits
FAIL
Occurrences: 11
Beam image obviously incorrect
FAIL
Occurrences: 10
Lamp: missing, inoperative or in the case of a multiple light source more than a half not functioning
FAIL
Occurrences: 10