Aston martin VANTAGE - 2022
12.5 faults per 100 tests
Year average for all cars of 2022 is 71.1 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Aston martin VANTAGE, model year 2022.
Sample size: 339 cars, 543 tests and 68 recorded faults.
0%
Less faults compared to the average car of same model year
Less faults compared to the average car of same model year
Quick summary
Total: 339 cars
The 2022 Aston Martin Vantage demonstrates an impressive overall defect rate of 12 per 100 vehicles, significantly lower than the average of 70 per 100 for its year, marking an 82% improvement. Notably, the model exhibits exceptionally low defects in categories such as brakes and steering, with rates of only 4% and 0%, respectively, compared to much higher averages. Additionally, it shows minimal issues in visibility and body structure, both recording 0% defects. The only area where the Vantage has a higher defect rate is in wheels, suspensions, and axles, but even here it is substantially lower than the average. Overall, the Vantage stands out as a well-performing vehicle in its class, especially in safety-related categories.
Cars by mileage segment
Total: 339 cars
More model years for Aston martin VANTAGE
Other models from Aston martin
Categories
Brakes
▲ 88.1% better
3.7 faults / 100 tests
Year avg: 31.2 / 100 tests
- Excessive fluctuation in brake effort through each wheel revolution
- Brake disc or drum: insecure, fractured or otherwise likely to fail
- Brake lining or pad: worn below 1.5mm
Steering
▲ 100.0% better
0.0 faults / 100 tests
Year avg: 0.4 / 100 tests
Visibility
▲ 100.0% better
0.0 faults / 100 tests
Year avg: 12.5 / 100 tests
Lights & Electrics
▲ 76.1% better
2.6 faults / 100 tests
Year avg: 10.9 / 100 tests
- The aim of a headlamp is not within limits laid down in the requirements
- The aim of a headlamp is not within limits laid down in the requirements
- A lens defective: which has no effect on emitted light
Wheels & Suspension
▲ 78.0% better
18.0 faults / 100 tests
Year avg: 82.0 / 100 tests
- A tyre: with a lump, bulge or tear … or with cords exposed or damaged
- A tyre: with a cut in excess of the requirements deep enough to reach the ply or cords
- A wheel: badly distorted or wear between wheel and hub at spigot mounting
- Tyre tread depth not in accordance with the requirements
- A tyre: with a cut in excess of the requirements deep enough to reach the ply or cords
Body/Structure
▲ 100.0% better
0.0 faults / 100 tests
Year avg: 1.6 / 100 tests
Equipment
▲ 100.0% better
0.0 faults / 100 tests
Year avg: 1.3 / 100 tests
Other
▲ 66.7% better
0.7 faults / 100 tests
Year avg: 2.1 / 100 tests
- Exhaust noise levels in excess of those permitted
- Lambda coefficient outside the default limits or the range specified by the manufacturer
Fault rate by mileage segment
Model
Year average
* Metric: faults per 100 tests.
Most common faults (Top 10)
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 18
Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 12
A tyre: with a cut in excess of the requirements deep enough to reach the ply or cords
FAIL
Occurrences: 10
Excessive fluctuation in brake effort through each wheel revolution
ADVISORY
Occurrences: 6
A tyre: with a cut in excess of the requirements deep enough to reach the ply or cords
ADVISORY
Occurrences: 5
The aim of a headlamp is not within limits laid down in the requirements
PRS
Occurrences: 5
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 2
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
FAIL
Occurrences: 2
A wheel: badly distorted or wear between wheel and hub at spigot mounting
ADVISORY
Occurrences: 2
Brake lining or pad: worn below 1.5mm
ADVISORY
Occurrences: 2
Serious faults (Top 10)
A tyre: with a cut in excess of the requirements deep enough to reach the ply or cords
FAIL
Occurrences: 10
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
FAIL
Occurrences: 2
Lambda coefficient outside the default limits or the range specified by the manufacturer
FAIL
Occurrences: 1
The aim of a headlamp is not within limits laid down in the requirements
FAIL
Occurrences: 1