Aston martin VANTAGE - 2017
Less faults compared to the average car of same model year
Quick summary
The 2017 Aston Martin Vantage exhibits a significantly lower overall defect rate compared to the average car of the same year, with 39 defects per 100 vehicles versus 134 for the average. This model stands out positively in several categories, particularly brakes, where it has a defect rate of just 20% compared to the average 71%, and steering, which shows no defects at all compared to a typical 5%. However, it does show a higher incidence of equipment-related issues, with 6% compared to the average of 3%. Additionally, defect rates are notably higher in the lower mileage ranges, suggesting that early issues may be more prevalent. Overall, the Vantage demonstrates strong performance in critical areas while facing some challenges with equipment reliability.
Cars by mileage segment
More model years for Aston martin VANTAGE
Other models from Aston martin
Categories
- Brake pipe damaged or excessively corroded
- Brake lining or pad: worn below 1.5mm
- Significant brake effort recorded with no brake applied indicating a binding brake
- Brake hose ferrules: excessively corroded
- Parking brake efficiency: below minimum requirement
- Windscreen or window damaged or seriously discoloured: but not adversely affecting driver’s view
- Windscreen washers not working or not providing sufficient fluid to clear the windscreen
- Wiper blade: missing or obviously not clearing the windscreen
- Wiper blade: missing or obviously not clearing the windscreen
- The aim of a headlamp is not within limits laid down in the requirements
- A lens defective: which has no effect on emitted light
- A lamp adversely affected by the operation of any other lamp
- The aim of a headlamp is not within limits laid down in the requirements
- Headlamp cleaning device: inoperative in the case of LED or gas discharge systems (HID)
- A tyre: with a lump, bulge or tear … or with cords exposed or damaged
- A wheel: badly distorted or wear between wheel and hub at spigot mounting
- A tyre: with a cut in excess of the requirements deep enough to reach the ply or cords
- Tyre tread depth not in accordance with the requirements
- A tyre: with a cut in excess of the requirements deep enough to reach the ply or cords
- A driver’s seat: fore and aft adjustment mechanism not working as intended
- Exhaust system has a major leak or is insecure
- A seat belt:
- A seat belt: webbing or flexible stalk significantly stretched or weakened
- Lambda coefficient outside the default limits or the range specified by the manufacturer
- Emission control equipment fitted by the manufacturer missing, obviously modified or obviously defective
- Emissions levels exceed default limits
- Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
- Engine MIL inoperative or indicating a malfunction