Alfa romeo STELVIO - 2017
104.1 faults per 100 tests
Year average for all cars of 2017 is 137.4 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Alfa romeo STELVIO, model year 2017.
Sample size: 255 cars, 540 tests and 562 recorded faults.
0%
Less faults compared to the average car of same model year
Less faults compared to the average car of same model year
Quick summary
Total: 255 cars
The 2017 Alfa Romeo Stelvio shows an overall defect rate of 104 per 100 vehicles, which is notably lower than the average of 134 per 100 for cars of the same year, representing a 22% improvement. The model exhibits particularly low issues in categories like Steering and Equipment, where it scores significantly better than the average. However, it faces challenges with Brakes, showing a higher defect rate than the average. Mileage-related trends indicate that defects increase with higher mileage, especially in the lower mileage segments, although the model remains competitive overall.
Cars by mileage segment
Total: 255 cars
More model years for Alfa romeo STELVIO
Other models from Alfa romeo
Categories
Brakes
▼ 18.1% worse
85.6 faults / 100 tests
Year avg: 72.5 / 100 tests
- Brake disc or drum: insecure, fractured or otherwise likely to fail
- Brake lining or pad: worn below 1.5mm
- Brake disc or drum: significantly and obviously worn
- Brake pipe damaged or excessively corroded
Steering
▲ 100.0% better
0.0 faults / 100 tests
Year avg: 5.6 / 100 tests
Visibility
▲ 31.0% better
10.0 faults / 100 tests
Year avg: 14.5 / 100 tests
- Windscreen washers not working or not providing sufficient fluid to clear the windscreen
Lights & Electrics
▲ 76.5% better
4.8 faults / 100 tests
Year avg: 20.4 / 100 tests
Wheels & Suspension
▲ 29.4% better
101.1 faults / 100 tests
Year avg: 143.1 / 100 tests
- Tyre tread depth not in accordance with the requirements
- A tyre: with a lump, bulge or tear … or with cords exposed or damaged
- A suspension pin, bush, joint or bearing: excessively worn
- Tyre tread depth not in accordance with the requirements
- A tyre: with a lump, bulge or tear … or with cords exposed or damaged
Body/Structure
▲ 47.1% better
3.7 faults / 100 tests
Year avg: 7.0 / 100 tests
Equipment
▲ 85.2% better
0.4 faults / 100 tests
Year avg: 2.7 / 100 tests
Other
▲ 71.1% better
2.6 faults / 100 tests
Year avg: 9.0 / 100 tests
Fault rate by mileage segment
Model
Year average
* Metric: faults per 100 tests.
Most common faults (Top 10)
Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 151
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 110
Brake lining or pad: worn below 1.5mm
ADVISORY
Occurrences: 54
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 35
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 30
Brake disc or drum: significantly and obviously worn
ADVISORY
Occurrences: 25
Brake pipe damaged or excessively corroded
ADVISORY
Occurrences: 17
Tyre tread depth not in accordance with the requirements
FAIL
Occurrences: 16
Windscreen washers not working or not providing sufficient fluid to clear the windscreen
FAIL
Occurrences: 13
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
FAIL
Occurrences: 11
Serious faults (Top 10)
Tyre tread depth not in accordance with the requirements
FAIL
Occurrences: 16
Windscreen washers not working or not providing sufficient fluid to clear the windscreen
FAIL
Occurrences: 13
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
FAIL
Occurrences: 11
Brake lining or pad: worn below 1.5mm
FAIL
Occurrences: 10
Brake disc or drum: significantly and obviously worn
FAIL
Occurrences: 9
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 8
The aim of a headlamp is not within limits laid down in the requirements
FAIL
Occurrences: 6
A transmission shaft constant velocity joint boot: missing, split, insecure or no longer prevents the ingress of dirt
FAIL
Occurrences: 5
A tyre: with a cut in excess of the requirements deep enough to reach the ply or cords
FAIL
Occurrences: 3
A suspension pin, bush, joint or bearing: likely to become detached
FAIL
Occurrences: 3