Alfa romeo BRERA - 2006
321.9 faults per 100 tests
Year average for all cars of 2006 is 371.9 faults per 100 tests
Dataset: MOT tests in Great Britain (period: 2024-01-01 to 2025-09-10) for Alfa romeo BRERA, model year 2006.
Sample size: 402 cars, 867 tests and 2,791 recorded faults.
0%
Less faults compared to the average car of same model year
Less faults compared to the average car of same model year
Quick summary
Total: 402 cars
The 2006 Alfa Romeo Brera has an overall defect rate of 322 defects per 100 vehicles, which is 13% lower than the average for its year at 369 defects per 100. Notably, it excels in categories such as brakes, visibility, and lights and electrics, showing significantly fewer defects compared to the average. However, it experiences a higher rate of defects in the "Other" category, indicating specific issues that may require attention. Mileage trends reveal that defect rates increase with higher mileage, particularly beyond 93,000 miles, although the Brera's figures remain relatively competitive throughout its mileage segments.
Cars by mileage segment
Total: 402 cars
More model years for Alfa romeo BRERA
Other models from Alfa romeo
Categories
Brakes
▲ 29.1% better
109.3 faults / 100 tests
Year avg: 154.1 / 100 tests
- Brake disc or drum: insecure, fractured or otherwise likely to fail
- Significant brake effort recorded with no brake applied indicating a binding brake
Steering
▼ 0.5% worse
20.3 faults / 100 tests
Year avg: 20.2 / 100 tests
Visibility
▲ 40.1% better
16.6 faults / 100 tests
Year avg: 27.7 / 100 tests
Lights & Electrics
▲ 48.7% better
57.0 faults / 100 tests
Year avg: 111.1 / 100 tests
Wheels & Suspension
▼ 0.8% worse
317.0 faults / 100 tests
Year avg: 314.5 / 100 tests
- A suspension component: excessively damaged or corroded
- Tyre tread depth not in accordance with the requirements
- A suspension pin, bush, joint or bearing: excessively worn
- A tyre: with a lump, bulge or tear … or with cords exposed or damaged
- The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
Body/Structure
▼ 5.4% worse
62.7 faults / 100 tests
Year avg: 59.5 / 100 tests
- Exhaust system has a major leak or is insecure
- Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
Equipment
▲ 47.5% better
6.2 faults / 100 tests
Year avg: 11.8 / 100 tests
Other
▼ 22.4% worse
54.7 faults / 100 tests
Year avg: 44.7 / 100 tests
- Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
Fault rate by mileage segment
Model
Year average
* Metric: faults per 100 tests.
Most common faults (Top 10)
A suspension component: excessively damaged or corroded
ADVISORY
Occurrences: 358
Tyre tread depth not in accordance with the requirements
ADVISORY
Occurrences: 310
A suspension pin, bush, joint or bearing: excessively worn
ADVISORY
Occurrences: 192
Fluid: leaking excessively and likely to harm the environment or to pose a safety risk to other road users
ADVISORY
Occurrences: 142
Brake disc or drum: insecure, fractured or otherwise likely to fail
ADVISORY
Occurrences: 128
A tyre: with a lump, bulge or tear … or with cords exposed or damaged
ADVISORY
Occurrences: 104
Exhaust system has a major leak or is insecure
ADVISORY
Occurrences: 103
The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
ADVISORY
Occurrences: 88
Significant brake effort recorded with no brake applied indicating a binding brake
ADVISORY
Occurrences: 64
Vehicle structure corroded to the extent that: the rigidity of the assembly is significantly reduced
ADVISORY
Occurrences: 54
Serious faults (Top 10)
A spring: or spring component fractured or seriously weakened
FAIL
Occurrences: 54
Parking brake efficiency: below minimum requirement
FAIL
Occurrences: 44
A suspension pin, bush, joint or bearing: excessively worn
FAIL
Occurrences: 43
Significant brake effort recorded with no brake applied indicating a binding brake
FAIL
Occurrences: 30
A suspension component: excessively damaged or corroded
FAIL
Occurrences: 30
Engine MIL inoperative or indicating a malfunction
FAIL
Occurrences: 25
Exhaust system has a major leak or is insecure
FAIL
Occurrences: 22
Tyre tread depth not in accordance with the requirements
FAIL
Occurrences: 20
The strength or continuity of the load bearing structure within 30cm … is significantly reduced or inadequately repaired
FAIL
Occurrences: 20
Windscreen washers not working or not providing sufficient fluid to clear the windscreen
FAIL
Occurrences: 20